Removable Rollertrack is a smart set-up for vehicles used for the logistical handling of air cargo pallets (read more about air pallets).
Unlike the complete Rollertrack set-up, the moving floors do not require modification of the frame, but are simply placed on the vehicle floor and then bracketed.
The ease of assembly allows us to offer our customers the possibility to assemble this set-up independently. In fact, it is possible to order it simply by communicating the type of vehicle and the dimensions of the floor and we will be able to send it to you in a short time.
A great advantage compared to a traditional set-up is the possibility of independently assembling and disassembling the platforms. This means that if one day you have to replace your vehicle you will not have to buy a new set-up but you can reuse the same platforms.
The mobile platforms contain idle rollers with pneumatic lifting that allow the overhead pallet to slide easily along the vehicle floor.
During the loading and unloading phase the rollers are raised to allow handling, while during the journey they are lowered to keep the load still.
As an additional safety measure, the system is equipped with manual or pneumatic pallet stops, to mechanically block the overhead pallets, avoid unwanted movements and ensure the stability of the load.
Unlike the complete Rollertrack set-up, which is installed in the vehicle frame, the moving floors are placed on the vehicle floor. A question that often arises in these cases is whether it takes away the space of the semi-trailer intended for overhead pallets.
With just 53 mm of thickness, the space taken away is minimal. Unless you have to load high pallets up to the roof you will not even notice the few centimeters missing.
The choice of the type of set-up depends on your needs. In this table we summarize a comparison between the two set-ups. However, we recommend that you discuss with us for an optimal choice.
Rollertrack | Re-movable Rollertrack | |
---|---|---|
Pneumatic lifting of rollers | Si | Si |
Safety pallet-stop | Manual or pneumatic | Manual |
Pneumatic lifting of rollers
Yes
Yes
Safety pallet-stop
Manual or pneumatic
Manual
Necessary modification of the vehicle frame at Moveco Systems
Yes
No
Assemble and disassemble the set up independently
No
Yes
Loss of usable internal height
Only 23 mm
(+ 17mm with raised rollers)
Only 53 mm
(+ 17mm with raised rollers)
Forkliftability
Yes
Yes
Possibility to choose the new generation "Bi-Rollertrack"
Yes
Yes
It can be used for the transport of refrigerated products
Yes
Yes